Skip to product information
1 of 14


SCULPFUN S30 Pro Max 20W Laser Engraver Cutter, Automatic Air-assist, 0.08*0.1mm Laser Focus, 32-bit Motherboard, Replaceable Lens, Engraving Size 410*400mm, Expandable to 935*905mm

SCULPFUN S30 Pro Max 20W Laser Engraver Cutter, Automatic Air-assist, 0.08*0.1mm Laser Focus, 32-bit Motherboard, Replaceable Lens, Engraving Size 410*400mm, Expandable to 935*905mm

Regular price $1,198.00 USD
Regular price $1,797.00 USD Sale price $1,198.00 USD
Sale Sold out
Shipping calculated at checkout.
Ship from:


Sculpfun S30 Pro Max Main Features

Sculpfun S30 Pro Max equips a 20W quad-diode laser module with a replaceable protective lens underneath that will make it possible to keep your engraver in top condition for many years!

Sculpfun S30 Pro Max uses the same focusing method as the brand`s models including the Sculpfun S10 and Sculpfun S9. The laser module is held on a sliding rail with thumbscrews on the back. The focusing is done by setting the correct distance between the laser module and the work material with an aluminum focusing block, which sets the distance to 40mm.

The air assist pump of the Sculpfun S30 Pro Max outputs 30 l/min and can be enabled via control software (Lightburn) for only the specified engraving layers. This is great because you can engrave one project that has multiple operations and for example, you can select to turn off the air assist for engraving and turn it on for laser cutting only. The air assist pump already comes with the machine.

  • Automatic Air-assist
  • 0.08*0.1mm Laser Focus
  • 32-bit Motherboard
  • Replaceable Lens
  • Engraving Size 410*400mm
  • Expandable to 935*905mm

Automatically Controlled Air Assist System

Sculpfun S30 series is equipped with an air-assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and is very suitable for the manufacture of exquisite gifts.

Built-in High-Pressure Air Assist Nozzle

S30 series is equipped with an advanced high-pressure air-assisted metal nozzle, which can generate 30L/min high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assist.

Ultra-thin 20W Laser

Adopting ultra-thin laser shaping technology, the laser focus of the S30 series is as thin as hair and very powerful for engraving or cutting. The S30 Pro Max 20W pursues the ultimate cutting speed, suitable for professionals, shops, or factories.

Replaceable Protective Lens

S30 series laser adopts an innovative replaceable lens, which greatly improves the service life of the laser, which is more than 10 times longer than other general lasers. When the lens is damaged or after long-term use, the lens can be replaced to restore the cutting power.

Expandable Engraving Area

The original engraving area is about 410x400mm, while it features XY-axis expandable design, so you can purchase a Y-axis expansion kit to expand the engraving area to 935x400mm; purchase an XY-axis expansion kit to upgrade up to 935x905mm engraving area, which can help you better handle large area engraving or cutting work.

Upgraded 32-bit Air-assist Motherboard

The latest 32-bit motherboard supports automatic air-assist control and reserves Bluetooth, and SD card offline printing function. (Upgrade Kit sold separately)
Industrial-grade Cutting Accuracy Extremely solid and high-precision linear slide rail X-axis make it reach industrial-grade engraving accuracy. When comparing small engraving details, the S30 series does not have the wavy pattern that appears in ordinary engraving machines.

Sturdy and Durable Aluminum Alloy Frame

Made of high-strength aluminum alloy, its frame can bear up to 50 kg weight without damage and is very durable. The frame can be used for a long time and maintain high precision, only need to upgrade the latest laser when the machine needs to be upgraded.

Safety Design

The presented A4 size steel pad can well protect the table from laser damage. There is an eye-catching power switch on the machine, you can directly and quickly turn off the power in an emergency.

Right-angle Measuring Ruler

There are precise scale lines on the X-axis and Y-axis to form a right-angle measuring ruler, which is convenient for you to quickly measure the size of the engraved object.


  • 1. Because of the powerful laser power, it is forbidden to run the engraving machine without being supervised. Pause it if you're not around.
  • 2. For detailed machine instructions, please refer to the manual for parameter settings.
  • 3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
  • 4. Do not touch the laser with your hands, otherwise, you may burn your hands.
  • 5. Please avoid a strong impact on the machine.
  • 6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult supervision.
  • 7. Do not apply the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.Specification


Type: Laser Engraving Machine
Model: S30 Pro Max 20W
Color: Blue


Laser Information:
Diode Laser Output Power: 20W (note: that this is light energy, not electrical energy)
Laser Focus: 0.08x0.1mm
Laser Wavelength: 455±5nm
Focusing Method: fixed focus column + sliding device
Laser Protection Cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles

Machine Information:
Engraving Accuracy: 0.005mm
Engraving Area Size: the standard version is 410*400mm, which can be expanded to 935x400mm or 935x905mm
Machine Power: about 60W

Engraving Area After Installing the Limit Switch:
S30: 380x385mm
S30 Pro: 380x385mm
S30 Pro Max: 370x363mm

Air Pump:
Type: mainboard-controlled air pump
Voltage: 24V
Flow: 30L/min
Air Hose Inner Diameter: 7.5mm

Motherboard: 32-bit air-assisted motherboard, reserve Bluetooth, SD card offline printing function. (Upgrade Kit sold separately)

Engraving Material: all kinds of wood (including walnut, cherry, and other high-density wood), MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone
Cutting Material: all kinds of wood (including walnut, cherry, and other high-density wood), MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards

Operating Software: LightBurn (with air assist function M8), LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, support Windows system, support MAC system
Supported File Formats: NC, BMP, JPG, PNG, DXF, and other image formats
Data Transmission Method: USB connection or Bluetooth wireless connection

Power Input: 100-240V AC, 50/60HZ 
Power Output: 24V 5A

Weight & Size

Product Weight: 7kg
Package Weight: 15kg
Product Size(L x W x H): 230*235*625mm
Package Size(L x W x H): 260*500*650mm

Package Contents

1 x S30 Pro Max Laser Engraver
1 x Laser Repair Kit
1 x 12V Automatic Air Pump
3 x A4 Size 3mm Wooden Board
2 x Limit Switch
1 x 12V 5A Power Adapter
1 x Power Cord
1 x USB Cable
1 x Air Tube
1 x Installation Tool Kit
1 x Laser Goggles
1 x A4 Metal Backing Plate
Steps 1-6 Install the Package
1 x X-axis Assembly
2 x X Profiles
2 x Y Profiles
1 x Control Box Assembly
3 x Support Feet
1 x User Manual

Sculpfun S30 Pro Max Recommended Settings

Material Name Thickness(mm) Processing Power(%) / Speed(mm/s) / Pass
Plywood 3MM Cutting 780mm/min 1 passes power 100% Air On
Plywood 6MM Cutting 360mm/min 1 passes power 100% Air On
Plywood 10MM Cutting 300mm/min 2 passes power 100% Air On
Plywood / Engraving 3000mm/min power 20%
Basswood 3MM Cutting 600mm/min 1 passes power 100% Air On
Basswood 6MM Cutting 300mm/min 2 passes power 100% Air On
Tung board/cork 10MM Cutting 300mm/min 2 passes power 100% Air On
Tung board/cork 15MM Cutting 180mm/min 1 passes power 100% Air On
Tung board/cork 20MM Cutting 180mm/min 3 passes power 100% Air On
Black Acrylic 6MM Cutting 300mm/min 3 passes power 100% Air On
Black Acrylic 11MM Cutting 180mm/min 6 passes power 100% Air On
MDF 3.6MM Cutting 300mm/min 1 passes power 100% Air On
MDF / Engraving 3000mm/min power 18%
Stainless steel / Engraving 900mm/min power 100%
g Kraft paper / Engraving 1800mm/min power 15%
Leatherwear / Engraving 1800mm/min power 15%
The limit test parameters are for reference only, and the actual parameters need to be adjusted according to the actual material thickness
View full details